How are special-shaped magnets made? I believe many people have this doubt, so how exactly is this special-shaped magnet made? Let's take a look

The first is raw material delivery. Generally, we will produce and list according to the customer's order. If the size of the special-shaped magnet is completely customized according to the customer, especially for the edging, a grinding wheel must be customized, ordinary perforated magnet stepped magnets and other chucks After so many years, basically everything is ready. Unless the specifications are very special.

1. The first thing is to get the raw materials in the warehouse. The special-shaped magnets are more likely to damage the materials. In order to ensure that the sufficient quantity is sent to the customers, we will prepare more materials appropriately.

2. The next step is based on the size, whether it is wire cutting or grinder, this is the most critical step for special-shaped magnets.

3. The third part is the cutting process of the inner circle slicer. This step is mainly for the master to control the tolerance. Generally speaking, +-0.05 is our normal tolerance. Of course, some electronic products require +-0.02mm. If it is cut down, the micrometer must be clamped for each cut, add 5 wire cuts, and pass through the grinder with one cut, so that the work error can be controlled within +-0.02mm. This process usually takes 3-5 hours to cut. The finished black flakes can be electroplated after 1 hour of cooking and drying.

4. Electroplating Generally speaking, there are two types of magnets: galvanized and nickel-plated. Electroplating is also a test of the level of a master. Galvanizing has no technical content. However, if the nickel plating is not good, there will be pinholes, peeling, and missing edges. Up.

5. The finished product is basically out. Finally, the magnetizing package is ready.

The above is about the production process of special-shaped magnets. If there are any shortcomings, please add them!